Skip to main content
CONFUSION in 2007
Confusion
CONFUSION in 2007
CONFUSION in 2007
Private Collection

Confusion

Vessel numberHV000380
Vessel Registration NumberXN79
Date1964
DimensionsVessel Dimensions: 4.47 m x 4.06 m x 1.7 m x 0.48 m (14.67 ft x 13.32 ft x 5.58 ft x 1.57 ft)
DescriptionSeacraft Manufacturing was based in Mordialloc, Victoria. The principal of the firm was builder Charles W Tull, originally known for his sailing boats on Port Phillip. In the mid 1950s he saw a need for simple and affordable recreational ski boat in contrast to the more expensive clinker or lapstrake style of hull available from his own firm and a number of other builders. By 1964 he had designed and built a sturdy plywood ski boat. His hullshape was similar in concept to the planked craft. The veed bow gradually flattened out to the stern so it had almost the same characteristics as the round bilge clinker hulls. However the simple panel construction was cheaper to build and well suited to a limited assembly line procedure using precut panels around wooden moulds. The boat caught on, despite being in competition with the increasingly popular fibreglass hulls.

In line with his ideas of simplicity, Tull also installed petrol motor car engines in the craft, and the fitout was basic. This produced a simple, robust craft with adequate performance, at a price that many could afford. Tull offered the boats in various stages of construction and fitout, with different engines and even a trailer. In 1966 DADDY O, a similar craft to CONFUSION was selling for $2013, complete with the ubiquitous Holden 186 straight 6 cylinder motor, while a deluxe version with more detailing and a Holden X2 motor sold for $2611. The concept remained viable up to the late 1960s when fibreglass hulls took over domination of the market.

CONFUSION is 4.47 m long, built from Ocean Proof marine grade plywood and in 2009 was still powered by its original Holden 6 cylinder engine, a 138 cu. in. Grey motor.

It was originally named WONDER and owned by R McKenzie for nearly 30 years, until 1992. It has remained in Victoria and in 2009 was being restored.




SignificanceCONFUSION is an early plywood recreational ski boat, locally designed, built and powered in Victoria by Seacraft Manufacturing Pty Ltd in 1964. It is a single chine craft that was inexpensive and robust, allowing many people with limited means to own a good performance recreational powerboat. It is a uniquely Australian story of ingenuity. CONFUSION is thought to be one of the few surviving examples of a Seacraft ski boat from this period, which saw high-volume fibreglass mass production gradually supercede the low volume, wooden boat assembly method using pre-cut parts that was used for CONFUSION's construction.
LALAGULI on display in 2010 at the Queenscliff Maritime Museum
Frank Goodman
1981
BINGARRA shows off its speed on a calm day on the Swan River in the late 1950s.
Stewart Ward
1957
MACQUARIE INNOVATION during trials
Lindsay Cunningham
1994
LIBA ONE in 2012  and showing  the paddlewheel arrangement on the centreline
Ian Showell
1964
HOANA under sail on Sydney Harbour early in its racing life.
J Hayes & Sons
1925
TAIPAN sailing in the third heat of the 1960 world championship series. The cutout Miller was f…
1959
ARCHIE BADENOCH in its major role as Police Vessel
General Motors Holden
1942
YVONNE in 2008
Bull Boatbuilders
1948
NEPENTHES is an excellent example of the 1950s flying bridge style of Halvorsen cruiser.
G & H Solomon
1950