Skip to main content
the elegant profile of the double surf ski
Roger Ninham Double Surf Ski
the elegant profile of the double surf ski
the elegant profile of the double surf ski
private collection

Roger Ninham Double Surf Ski

Vessel numberHV000517
Vessel type
Date1960s
DimensionsVessel Dimensions: 6.5 m x 0.75 m (21.33 ft x 2.46 ft)
DescriptionRoger Ninham built the ski in Sydney at his Manly Vale premises. It is a timber plywood moulded hull shape with red cedar faced plywood fore and aft decking. The double cockpit seating is moulded in fibreglass, and the seats are set into the hull. Both seats came off the same mould and were trimmed to suit the hull then fitted together.This seating feature was quite revolutionary, up to this time paddlers on surf skis had sat on a flat deck at sheer level, but the moulded seat lowered the paddler’s centre of gravity, and afforded a more secure seat. Pedals were fitted for the forward paddler, linked by wire to a stern or transom hung rudder, a new feature too for the surf ski, but a detail relatively common on racing kayaks. Both features were quickly adopted by other surf ski builders. It is thought the craft was most likley used at the Queenscliff SLSC on the northern beaches of Sydney

Ninham only built a few surf skis, and was best known for the design and construction of about fifty SLSA surfboats during his short career. He died in 1985 aged 42, but had achieved a great deal in rowing and surfing and was hugely respected. He was born In WA, and initially rowed competitively, representing Australia in the 1960 and 1964 Olympics, and 1962 Commonwealth Games. He worked for his father building some surfboats in WA and became involved in surfboat rowing as well. In the mid-1960s he came to Sydney, worked for a local builder for a short period then set up his own yard in Manly Vale.

Warren Molloy at Queenslciff SLSC asked him to make a surf boat with a bit more rocker in the ends in 1971. This boat, which Roger had designed, built and rowed in the number 3 seat for the Queenscliff NSW SLSC crew then won the1971 Australian National Championship in Perth WA. Warren Molloy was sweep in that boat, and recalls that Roger was 'one out of the mould", a rare character who had great feel for the boat and crew as he rowed, was innovative as a builder and always gave great assistance to other competitors. He came back from the win in WA with 13 orders for boats, and his business prospered.

SignificanceThis double surf ski was built by Roger Ninham in the mid 1960s and incorporated features that were new to the type. Two seats built of fibreglass, a relatively new material for skis, were built into the deck instead of it being a flat surface, and a trailing rudder for better control was used for the first time. In 2012 the wooden hull, rudder and moulded fibreglass seating cockpits are all in original condition.
Vessel Highlights
Fletcher Jones on left
Bill Clymer
1973
The Grange crew winning the National Surf Boat Championship Title in 1988.
Clymer Boats
1985
The elegant profile and rounded foredeck are distinctive features on NON STOP II.
Norm Casey
1957
The deck layout of ST CHRIS features two sets of foot straps and a breakwater on the foredeck.
Herb Robson
1953
The Prot-Craft surf ski remains in good condition, and shows the basic arrangement of these ear…
Prott-Craft
1947
The three sets of footstraps on SS BILL FISHER allowed one or  two people to use the craft.
Herb Robson
1958
BOOFA when it was on display at the Eden Whaling Museum in the 1980s
N & E Towns
1946
IRB 1
Dunlop Aust.
1970
FLYING FISH IV in action
Arthur Wallace
1968
BARAGOOLA after its conversion to diesel electric
Mort's Dockyard and Engineering
1922