Skip to main content
MOLLYHAWK III at Goolwa 2015
Mollyhawk III
MOLLYHAWK III at Goolwa 2015
MOLLYHAWK III at Goolwa 2015
D Payne ANMM

Mollyhawk III

Vessel numberHV000689
(not assigned)AM2429
(not assigned)OL178S
Previous owner
Date1945
DimensionsVessel Dimensions: 11.58 m × 3.35 m × 0.76 m, 12.2 tonnes (38 ft × 11 ft × 2.5 ft, 12 tons)
DescriptionMOLLYHAWK III is one of the 38 foot sea-plane tender designs built by Lars Halvorsen specifically for service in World War II. The design was adapted to other uses such as air-sea rescue, fast supply and patrol work. MOLLYHAWK III is understood to be AM2429, built in 1945 and believed to have been deployed to Darwin as a fast supply launch. As with all the 38s, the 11.58 m long hull is a single chine, vee section shape with double diagonal Oregon planking. Many were fitted with twin petrol engines, but this example is one of the single engine diesel versions. It is currently powered by a 6 cylinder Detroit from the 1950s or 1960s, and remains in the configuration it had as military vessel, but has additional bunks, settees and other fit out internally, and it also has had a canopy fitted over aft deck for shade.

The design for the 38s was undertaken by Harold Halvorsen after the outbreak of the Second World War. It was prepared for the RAAF as a high speed air-sea rescue boat but it also became a standard defence boat with the ability to fulfil various roles. A production line managed by Trygve Halvorsen was established at the Ryde yard, and two craft per week were able to be completed. Sources differ on the number made, it is either 147 or 178, and they were built and served with the RAN, RAAF, Army and US Army Small Ships Section. Officers of the US Army section declared the design to be the most efficient craft they used during the war.

Carl Halvorsen recalled the production line:
“The initial work of building these 38 footers was carried out with the hull upside down. After planking had been completed the hull was turned and placed on a mobile cradle on rails which ran right thorough the building and extended to form slipways into the water. The boat moved along the track from one construction crew to the next as each section of the work was done and on completion rolled down the launching ways still resting on the original cradle.”
AM1477 and AM1478 shared a long patrol during 1944 in the Dutch zone of South West New Guinea. Lt Jesser-Cooper who was in command noted at the completion of the nine month patrol:

“As officer in charge of this patrol, I cannot speak too highly of the Halvorsen 38. She was asked for the almost impossible from her kind of boat and never failed us at any time, except for minor engine breakdowns.
I should like all to know who build and work at Halvorsens that the men who sail in their boats appreciate, as no other can, the strength and endurance of these small craft.”

After the war a number remained in service but eventually all were disposed of, and it is not yet recorded how many may still be extant. Two were built in 1943 as torpedo recovery craft, and the twin engine version BINCLEAVES (HV000568) remains extant and is to be converted back to its military configuration.

MOLLYHAWK III was on display at the 2015 SA Wooden Boat Festival in Goolwa and regularly cruises on the Murray River.

SignificanceMOLLYHAWK III is an example of an Australian made high-speed military launch from World War II. It was designed and built in Australia by Lars Halvorsen Sons, one of the country’s premier boatbuilding firms. It represents how the company diversified during the war to build military craft instead of luxury private vessels, and how they could also design and mass produce a specialist working craft to the highest standards of construction and performance. MOLLYHAWK III is one of the 38 Foot designs, and during the war they received high praise from the military. MOLLYHAWK III retains all the construction and superstructure details from 1945, and only has the addition of fit-out below decks in the cabin areas and a shade top over the aft deck.
KRAIT restored for the 75th Anniversary event on 26th September 2018 at the ANMM wharves.
c 1934
HDML 1321 in Melbourne in 1956
Purdon and Featherstone
1943
FREYA on the Solent in the Admirals Cup
Lars Halvorsen Sons Pty Ltd
1963
BINCLEAVES in 2012
Lars Halvorsen Sons Pty Ltd
1943
LIANNA in 2007
Lars Halvorsen Sons Pty Ltd
1957
AIR VIEW in 2013 under restoration
Miami Boat Building Company, Florida, USA
1944
KWEENA at Batemans Bay NSW 2012
Lars Halvorsen Sons Pty Ltd
1933
VICTORIA at Dartmouth Dam in 2015
Botterill & Frazer
c1944
COMMISSIONER in 2009
Green Point Naval Boatyard
1943