Skip to main content
BINCLEAVES in 2012
Bincleaves
BINCLEAVES in 2012
BINCLEAVES in 2012
Private Collection

Bincleaves

Vessel numberHV000568
Vessel Registration NumberMD09S
Previous owner (Australian, founded 1913)
Date1943
DimensionsVessel Dimensions: 11.58 m (38 ft)
DescriptionThe design for BINCLEAVES was done entirely by Halvorsen for the Second World War, prepared as a standard defence boat with the ability to fulfil various roles. 147 were built and served with the RAN, RAAF, ARMY and US Army Small Ships Section. Officers of the US Army section declared the design to be the most efficient craft they used during the war. They were wooden craft, 11.58 m long, double planked single chine hulls with twin engine installations.

The RAN operated a torpedo range at Taylors Point on Pittwater NSW from 1943 to 1983. Navy launches cleared small boats from the firing range, then retrieved the torpedos after they had been fired and ‘hit’ their target, one of three pontoons moored in stages down the waterway with nets to secure the torpedo. The torpedos then in use had to be test fired before they went into storage ready for active use. BINCLEAVES served at the range from 1943 through to 1983. It was given an enclosed wheelhouse in the 1960s and after 1983 served at HMAS Waterhen from 1984 until being decommissioned in 1987 and sold at auction in 1988.

A sister ship LOCH LONG, TRB 585, was launched in June 1943. Both craft were named after torpedo testing establishments in the UK. The vessels could recover two torpedoes, they remained afloat and were placed one each side, slung from a beam. The craft were originally mounted with a machine gun, and powered by twin Perkins diesels, and able to travel at up to 24 knots. 5059 torpedoes were fired from the range, with only three going astray. In 1983 the firing station and outer wharf were removed and the centre was converted into a diving and hydrographic centre for HMAS Penguin.

BINCLEAVES was sold to new owners in Renmark SA, and it has since stayed there as a private launch on the Murray River through subsequent owners. In 2013 it has been purchased by new owners who are active with military vehicle preservation groups, and they intend to restore the vessel to its naval appearance and arrangement as TRB 586.

SignificanceBINCLEAVES is a wooden motor launch built at Lars Halvorsen Sons' yard in Ryde NSW for the Royal Australian Navy. It was built as a Torpedo Recovery Boat and launched on 31st August 1943, numbered TRB 586. It was adapted from a standard design and is the only Torpedo Recovery Boat variant of this design to remain extant in Australia.
MOLLYHAWK III at Goolwa 2015
Lars Halvorsen Sons Pty Ltd
1945
HMAS OVENS on display at WAMM 2013
Scotts Shipbuilding and Engineering Co Ltd
1967
DEERUBBIN on Sydney Harbour in 2009
Lars Halvorsen Sons Pty Ltd
HMAS Vampire
Cockatoo Island Dockyard
1956
KRAIT restored for the 75th Anniversary event on 26th September 2018 at the ANMM wharves.
c 1934
HMAS DIAMANTINA undergoing sea trials before being commissioned on the 27th of April 1945.
Royal Navy
1944
HMAS WHYALLA is now landlocked and on display in its original configuration at Whyalla Maritime…
BHP Whyalla
1941
HMAS Onslow
Scotts Shipbuilding and Engineering Co Ltd
1968
HDML 1321 in Melbourne in 1956
Purdon and Featherstone
1943
JOHN OXLEY in Cowan Creek, Hawkesbury River, 1972.
Bow, McLachlan and Co.
1927
Brindabella
Scott Jutson
1993
COMMISSIONER in 2009
Green Point Naval Boatyard
1943